Loading…
Loading page
Same-Day Aircond Installation & Servicing Across KL & Selangor — From RM199
Loading…
KL & Selangor's Most Trusted Installation Specialists
Expert wall-mounted, ceiling cassette & window unit installation across Kuala Lumpur and Selangor. Vacuum pump commissioning, Type L copper piping, insulation, 1-month workmanship warranty.
Transparent Installation Pricing
All extras quoted & approved on-site BEFORE work starts. No surprises.
Why KL Renovator for Installation?
We don't just mount units — we engineer complete cooling systems that last.
Mandatory 500-micron vacuum on every install. No exceptions. Protects your compressor for years.
Premium copper piping with 9–13mm insulation. No cheap thin-wall substitutes.
Proper electrical per MS IEC 60364. Correct breaker sizing, earth leakage, isolator included.
15-min run test: pressures, amp draw, thermostat calibration, cooling delta-T verified.
Job card with checklist signed. Any install-related issue in 30 days — we return free.
We handle building approvals, lift booking, service-ledge access, after-hours rules seamlessly.
Daikin, Panasonic, Mitsubishi, York, Midea, LG, Samsung, Carrier, Fujitsu, Hitachi, Sharp, Acson, Gree, Toshiba, Hisense, Aux, TCL, Isonic, National, Sanyo.
Petaling Jaya, Cheras, Ampang, Subang, Puchong, Shah Alam, Damansara, Klang, Kajang, Bangsar, Mont Kiara, Setapak, Batu Caves, Putrajaya, Cyberjaya.
Our 7-Step Installation Process
Every installation follows this exact sequence — no shortcuts, no surprises.
Contact us via WhatsApp at +60182983573 with your area, unit type (wall-mounted, ceiling cassette, window), and HP size. We confirm pricing and schedule a same-day or next-day site survey. Our technician assesses piping route, outdoor unit placement, and electrical requirements.
Our certified HVAC technician arrives with all tools, materials (copper pipe, insulations, wiring), and safety equipment. Drop sheets protect your floors and furniture. We confirm the exact installation plan with you before starting.
Type L or Type M copper pipes (based on HP size) are cut, flared, and routed neatly. Insulation (minimum 9mm) prevents condensation and energy loss. Pipes are secured with proper brackets — no sagging, no sharp bends that restrict refrigerant flow.
PVC drain pipe installed with minimum 1:50 gradient for gravity drainage. Anti-siphon trap prevents backflow. Condensate tested before closing up. For high-rise condos, we route to nearest floor trap or balcony drain per building management rules.
Dedicated circuit with correct MCB rating (16A for 1.0–1.5HP, 20A for 2.0–2.5HP, 32A for 3.0HP+). Wiring sized per Malaysian standards. Earth leakage protection verified. Outdoor unit isolator installed for safety and maintenance access.
Two-stage vacuum pump pulls system down to 500 microns or below — removing all moisture and non-condensables. This step is NON-NEGOTIABLE. Skipping vacuuming causes compressor failure, acid formation, and voids manufacturer warranty. We hold vacuum for 15+ minutes to confirm no leaks.
Factory charge released. System runs for 15+ minutes. We verify: cooling output (thermometer at supply/return), running pressures, amp draw, thermostat calibration, zero vibration, zero leaks. Written 1-month workmanship warranty card handed over. Job card with checklist signed.
Materials & Technical Standards
Brand Installation Expertise
From Daikin inverter multi-split systems to Midea wall-mounted units — our technicians know every brand's quirks, torque specs, and commissioning procedures.
Daikin
Expert Installation
Panasonic
Expert Installation
Mitsubishi
Expert Installation
Acson
Expert Installation
York
Expert Installation
Carrier
Expert Installation
Midea
Expert Installation
Haier
Expert Installation
Toshiba
Expert Installation
Hitachi
Expert Installation
Samsung
Expert Installation
LG
Expert Installation
Sharp
Expert Installation
Fujitsu
Expert Installation
Gree
Expert Installation
National
Expert Installation
Hisense
Expert Installation
Aux
Expert Installation
TCL
Expert Installation
Isonic
Expert Installation
Our Promise
Not verbal. Not implied. A signed job card with checklist — your proof of professional installation.
Any installation-related issue — leaks, vibration, electrical, cooling — we return free.
On any component we supply (brackets, piping, wiring, fittings).
Our job card proves professional install — keeps your 5-year compressor warranty valid.
No hidden fees. No "while we're here" surprises. Every extra material is quoted and approved by you on-site before any drilling or cutting begins.
Get Confirmed Price on WhatsAppFrequently Asked Questions
Wall-mounted installation starts from RM 199 for 1.0–1.5 HP including 7 ft copper pipe, insulation, electrical wire and drain pipe. Ceiling cassette from RM 290. Window unit from RM 199. Extra materials beyond 7 ft are charged per foot using HP-wise rates: Copper pipe RM 17/ft (1.0–1.5 HP), RM 23/ft (2.0–2.5 HP), RM 27/ft (3.0–3.5 HP). Wire RM 9/ft. Small PVC casing RM 6/ft; large PVC casing RM 12/ft. All prices confirmed before work begins. Drain pipe beyond the included 7 ft is RM 5/ft. All prices confirmed before work begins.
Standard wall-mounted installation takes 3–5 hours for a single unit. Ceiling cassette takes 5–8 hours due to ceiling suspension and drain pump wiring. Multi-unit whole-house installations typically complete in 1–2 days. Same-day installation available for bookings made before 11 AM.
Yes — we regularly install in condos across KLCC, Mont Kiara, Bangsar, Sentul, PJ, and Subang Jaya. We coordinate with building management for lift/loading bay access, follow security procedures, and ensure outdoor unit placement complies with JMB rules. Our technicians are experienced with service-ledge and balcony installations.
We use Type L copper pipe for 1.0–2.5 HP wall-mounted units and Type M for 3.0 HP+ where wall thickness permits. All pipes are cleanly prepared during brazing to prevent oxidation. insulation (9–13mm) is standard. This exceeds the minimum Malaysian standard and ensures long-term reliability.
Vacuuming removes moisture and air from the refrigerant lines. Moisture + refrigerant = acid, which destroys compressor windings and clogs capillary tubes. Non-condensables raise head pressure and kill efficiency. We pull to 500 microns and hold for 15+ minutes. No vacuum = no warranty. This is standard HVAC best practice worldwide.
Yes — we install year-round. For outdoor work during rain, we use pop-up canopies and waterproof covers. Indoor unit mounting and piping continue unaffected. Only heavy lightning storms pause outdoor compressor placement for safety. Same-day slots may be slightly tighter during monsoon — book early.
Yes — Malaysian regulations (MS IEC 60364) require a dedicated circuit with its own MCB for each aircond unit. We install a new circuit from your DB box if one doesn't exist, or verify the existing circuit's capacity. Plug-in units still need a dedicated socket on a protected circuit. Electrical work is included in our installation quote.
1-month written workmanship warranty on all installation labour. If any installation-related issue arises (leaks, vibration, electrical fault, poor cooling) within 30 days, we return and rectify at zero cost. Manufacturer warranty on the unit itself (typically 5 years compressor, 1 year parts) is separate and requires proof of professional installation — which our job card provides.
WhatsApp +60182983573 with your area, unit type (wall-mounted/ceiling cassette/window), HP size, and preferred date. We confirm price and schedule within 30 minutes. Same-day installation available for early bookings. We cover all KL & Selangor areas including Petaling Jaya, Cheras, Ampang, Subang Jaya, Puchong, Shah Alam, Damansara, Klang, Kajang, Bangsar, Mont Kiara, Setapak, Batu Caves, Putrajaya, and Cyberjaya.
Same-day slots available across KL & Selangor. Transparent pricing from RM 199. 1-month workmanship warranty. All 20 brands.
We serve all KL & Selangor areas — Petaling Jaya, Cheras, Ampang, Subang Jaya, Puchong, Shah Alam, Damansara, Klang, Kajang, Bangsar, Mont Kiara, Setapak, Batu Caves, Putrajaya, Cyberjaya & more.
Definitions
Short, plain-language definitions of the terms used above — written by the technicians who do the work, not copied from a manufacturer brochure.
Before the refrigerant valves are opened, the installer connects a vacuum pump to the service port and pulls the air and moisture out of the new copper line set. Air left in the pipe carries water vapour, which reacts with compressor oil and forms acid that eats the windings from inside. It is the step most often skipped on a rushed installation because nothing looks different afterwards.
Ask to see the gauge during vacuum-down; a proper job holds the vacuum for several minutes after the pump stops.
The isolator is the local switch that cuts power to one aircond so a technician can work on it safely; the MCB is the circuit breaker in the distribution board that protects that circuit against overload and short circuit. Each unit should sit on a correctly rated circuit — sharing a lighting circuit or running off an extension lead is both a nuisance-trip and a fire risk.
Repeated tripping is a wiring or capacity problem to investigate, never something to fix by resetting the breaker harder.
A flare joint is the cone-shaped end formed on soft copper tubing so it can seal metal-to-metal against the unit's service valve under a flare nut. The cone must be cut square, deburred and torqued to spec. Over-tightening cracks it, under-tightening leaks slowly — which is why most refrigerant loss on a young system is found at a flare, not in the coil.
A soap-bubble test on every flare after commissioning takes two minutes and catches the leak before it costs you a top-up.
Side-by-side comparison
The equipment is the same. Access, approvals and pipe runs are what change the day — and the price.
| What to compare | Condominium / high-rise | Landed house |
|---|---|---|
| Approval needed | JMB / management permit, often a deposit | None beyond the owner's consent |
| Outdoor unit position | Fixed ledge or designated aircond bay | Flexible — shaded side wall or ground frame |
| Typical pipe run | Longer, sometimes across a corridor | Short and direct |
| Working-hour limits | Drilling windows set by management | Neighbour courtesy only |
In short: In a condo, secure the management permit and the service-lift booking before the technician is dispatched; in a landed house, spend that effort on choosing a shaded, serviceable outdoor position instead.