Loading…
Loading…

Installation of Hisense
Professional Hisense Aircond Installation
Whether you are moving into a new home or upgrading an old unit, KL Renovator handles full Hisense aircond installation from survey to final testing. We install all Hisense series including Hisense TUGS Series, Hisense KAGS Series and Hisense CBGS Series, using genuine or OEM-equivalent parts and confirming every price before drilling.
We install Hisense units that use R32 and R410A refrigerant. Our technicians vacuum-test every new Hisense installation to protect the compressor and keep the manufacturer's warranty valid. We never mix refrigerant types and confirm the correct gas charge during commissioning.
Installation Types for Hisense
The most common choice for Hisense homes and condos. We mount the indoor unit on a reinforced bracket, run copper pipe and wiring to the outdoor compressor, and finish with vacuum pump commissioning. Ideal for bedrooms and living rooms.
Popular for offices, retail shops, and large open-plan homes using Hisense systems. We fit the ceiling suspension kit, drain pump, and piping, then align the cassette for even four-way airflow.
A practical, budget-friendly option for older apartments and rental rooms. We secure the Hisense unit in the window frame, seal the opening, and wire it to a dedicated circuit.
Hisense Installation Pricing
Prices are for standard installation including 7 ft copper pipe, insulation, electrical wire and drain pipe. Extras quoted first.
Why Install Hisense with KL Renovator?
Our installers understand Hisense wiring, PCB logic, and gas requirements, so installations are completed correctly the first time.
We measure room size, ceiling height, and sun exposure before recommending 1HP, 1.5HP, or 2HP for your Hisense unit.
Every Hisense installation includes proper evacuation to protect the compressor and keep manufacturer warranty valid.
Copper pipe, wirings, and extras are quoted before drilling begins — no surprise bills for your Hisense install.
Real Installation Work
Every photo below is real installation work completed by our own technicians across Kuala Lumpur and Selangor.
Verified Google Reviews
Great lads with a good attitude, dedicated and hard working. They are willing to sacrifice their time to ensure the job is done well. Good work.
Response fast to your queries and will answer all your questions should you need any clarification. The job is clean and tolerable for the price.
Good technician.. tq very much
Published pricing · comparison table
Use this table as a starting point before booking in Hisense Aircond Installation. These are KL Renovator's published prices; the technician confirms the final scope on-site before work starts.
Aircond service for Hisense Aircond Installation means a technician checks cooling performance, airflow, drainage, electrical safety and visible wear before recommending basic cleaning, chemical wash, troubleshooting or replacement. The goal is to solve the actual fault without selling unnecessary work.
| Service option | Published price | Best for |
|---|---|---|
| New wall-mounted installation | RM 199 | For Hisense Aircond Installation: replacing an old unit or fitting a new room |
| Basic service / cleaning | RM 99 | For Hisense Aircond Installation: routine maintenance when cooling is still acceptable |
| Pressure chemical wash | RM 120 | For Hisense Aircond Installation: weak airflow, odour, dusty blower wheel or indoor coil grime |
| Chemical overhaul | RM 420 | For Hisense Aircond Installation: severe blockage or water leaking after normal servicing |
| Diagnostic / troubleshooting | RM 88 | For Hisense Aircond Installation: unknown fault, tripping, blinking light or noisy outdoor unit |
Gas top-up is charged by refrigerant: R22 RM 2.50 / PSI, R410A RM 3.00 / PSI, R32 RM 3.00 / PSI. Extra copper pipe, wiring or access work follows the published material list.
Expert review
Last reviewed: 7 September 2026
This Hisense Aircond Installation page was checked by KL Renovator's licensed and certified aircond technicians against the current service scope, warranty wording and published price list. The review focuses on realistic dispatch, safe electrical practice, transparent quotations and when a repair is more sensible than replacement.
About the KL Renovator technician team →Relevant public references used when we discuss efficiency labels, electricity use, product compliance or work-at-height safety:
By township
Hisense installs we book across KL and Selangor most often start from these township pages: servicing Hisense around Kajang, Hisense in Balakong, Puchong Hisense visit, servicing Hisense around Klang, Hisense in Cheras and Ampang Hisense visit. Each page is the local Hisense service visit for that area — building access, typical HP and the faults we see on that compressor.
Frequently Asked Questions
Hisense chemical wash from RM 120, chemical overhaul from RM 420, R32 gas top-up from RM 3.00/PSI, basic service from RM 99.
Yes — KL Renovator services all Hisense ConnectLife-enabled models across KL and Selangor, including app-pairing checks during servicing.
Golden Fin is Hisense's anti-corrosion coating applied to the outdoor unit's condenser coil and indoor unit's evaporator coil. The coating protects the aluminium fins from salt air, humidity, and industrial pollution that cause corrosion over time. This is especially valuable for coastal areas like Klang, Port Klang, and Penang. With Golden Fin coating, Hisense outdoor coils typically last 12–15 years before showing significant corrosion, versus 7–10 years for uncoated coils. The coating itself is not serviceable but is durable enough not to be affected by chemical wash using pH-neutral solutions.
Yes — Hisense has become a popular mid-range choice in Malaysia since 2018, especially in newly launched condos and landed houses. The build quality is solid for the price, and the Golden Fin coating is a genuine differentiator for outdoor durability. The compressor (Hisense's own design) is reliable for normal residential use. Main service consideration: the ConnectLife Wi-Fi module can occasionally lose pairing after a power surge — we reset the module and re-pair during service if needed (no charge, included in standard service).
Hisense aircond units in Malaysia with regular servicing typically last 10–13 years, comparable to other mid-range brands. The Golden Fin coating helps extend outdoor coil life. For landed houses where the outdoor unit is exposed to afternoon sun, we recommend 6-monthly chemical wash to maintain cooling performance. For condo installations where the outdoor is in a covered service yard, 12-monthly intervals are sufficient.
Same-day Hisense installation slots are available across KL & Selangor. Get a confirmed price before we drill.