Loading…
Loading page
Same-Day Aircond Installation & Servicing Across KL & Selangor — From RM199
Loading…
Aircond Installation in SS2
Professional Aircond Installation in SS2
SS2 homes and businesses use many different aircond setups — high-rise condos near Petaling Jaya, landed terraces around SS2 Pasar Malam, and shoplots along busy commercial strips. KL Renovator's installation team works in all of them, sizing the right HP, running copper pipe, and commissioning every unit properly.
We install airconds throughout SS2, including Petaling Jaya, SS2 Pasar Malam, Damansara Utama (SS21) and Kelana Jaya. Near Petaling Jaya, we commonly fit wall-mounted split units in condos and serviced residences. Around Kelana Jaya, we handle landed home installations as well as shoplot and small-office ceiling cassette systems. If your address is not listed, WhatsApp us anyway — our SS2 coverage route extends to all adjoining neighbourhoods.
Installing Airconds Across SS2: Local Know-How
Installing an aircond in SS2 means planning around how the area is actually built. Around Petaling Jaya and SS2 Pasar Malam the housing leans toward landed terraces and semi-D homes; elsewhere — Damansara Utama (SS21), Kelana Jaya and Kelana Jaya — high-rise condos and serviced apartments dominate. Each calls for a different HP sizing setup and drainage plan, which is why we survey before we quote on every SS2 job.
SS2 (60,000+, Selangor) is on our standing installation route, so confirmed jobs usually get a same-day or next-day slot rather than a week-long wait. We bring Type L copper for 1.0–2.5 HP units, vacuum pumps for proper commissioning, and the torque specs for all 20 brands — so whether your unit is a Daikin, Panasonic, Mitsubishi or something else, it is fitted to manufacturer standard the first time.
Sizing the unit correctly is where most SS2 installs go right or wrong. Bedroom orientation, glass area, ceiling height and how many hours a day the room is occupied all feed the decision between 1.0, 1.5 and 2.0 HP. An over-sized inverter short-cycles and feels clammy; an under-sized one runs flat-out and wears early — which is why we calculate, never guess, on every SS2 job.
Installation Types for SS2 Homes & Businesses
The most common choice in SS2 homes and condos. We mount the indoor unit on a reinforced bracket, run copper pipe and wiring to the outdoor compressor, and finish with vacuum pump commissioning. Ideal for bedrooms and living rooms near Petaling Jaya.
Popular for SS2 offices, retail shops, and large open-plan homes. We supply and fit the ceiling suspension kit, drain pump, and piping, then align the cassette for even four-way airflow.
A practical, budget-friendly option for older SS2 apartments and rental rooms. We secure the unit in the window frame, seal the opening, and wire it to a dedicated circuit.
SS2 Installation Pricing
Prices are for standard installation including 7 ft copper pipe, insulation, electrical wire and drain pipe. Extras quoted first.
Why Install with KL Renovator in SS2?
Room area, glazing, orientation and occupancy all feed the sizing. Getting this wrong in SS2 means either a compressor that never rests or a room that is cold and clammy.
Before quoting we look at your DB box. Older SS2 properties often lack a spare MCB way, and a 2.0 HP unit needs its own circuit — better to know before installation day.
Drilling makes dust. We sheet the area, vacuum on completion, and take the packaging away with us — your SS2 home is left as we found it.
Daikin, Panasonic, Mitsubishi, Acson, York and 15 more. We carry the torque specs and commissioning procedure for each rather than fitting them all the same way.
Real Installation Work
Every photo below is real installation work completed by our own technicians across Kuala Lumpur and Selangor.
Verified Google Reviews
Great lads with a good attitude, dedicated and hard working. They are willing to sacrifice their time to ensure the job is done well. Good work.
Response fast to your queries and will answer all your questions should you need any clarification. The job is clean and tolerable for the price.
Good technician.. tq very much
Published pricing · comparison table
Use this table as a starting point before booking in Aircond Installation SS2. These are KL Renovator's published prices; the technician confirms the final scope on-site before work starts.
Aircond service for Aircond Installation SS2 means a technician checks cooling performance, airflow, drainage, electrical safety and visible wear before recommending basic cleaning, chemical wash, troubleshooting or replacement. The goal is to solve the actual fault without selling unnecessary work.
| Service option | Published price | Best for |
|---|---|---|
| Chemical overhaul | RM 420 | For Aircond Installation SS2: severe blockage or water leaking after normal servicing |
| Diagnostic / troubleshooting | RM 88 | For Aircond Installation SS2: unknown fault, tripping, blinking light or noisy outdoor unit |
| New wall-mounted installation | RM 199 | For Aircond Installation SS2: replacing an old unit or fitting a new room |
| Basic service / cleaning | RM 99 | For Aircond Installation SS2: routine maintenance when cooling is still acceptable |
| Pressure chemical wash | RM 120 | For Aircond Installation SS2: weak airflow, odour, dusty blower wheel or indoor coil grime |
Gas top-up is charged by refrigerant: R22 RM 2.50 / PSI, R410A RM 3.00 / PSI, R32 RM 3.00 / PSI. Extra copper pipe, wiring or access work follows the published material list.
Expert review
Last reviewed: 7 September 2026
This Aircond Installation SS2 page was checked by KL Renovator's licensed and certified aircond technicians against the current service scope, warranty wording and published price list. The review focuses on realistic dispatch, safe electrical practice, transparent quotations and when a repair is more sensible than replacement.
About the KL Renovator technician team →Relevant public references used when we discuss efficiency labels, electricity use, product compliance or work-at-height safety:
Frequently Asked Questions
Wall-mounted installation in SS2 starts from RM 199 for 1.0–1.5 HP, RM 249 for 2.0 HP, and RM 279–RM 329 for larger units. Ceiling cassette starts from RM 290, and window units from RM 199. Every quote includes the first 7 ft of copper pipe, insulation, electrical wire and drain pipe. If an outdoor bracket is required, it is quoted separately as a paid special charge before work begins.
A standard wall-mounted unit in SS2 takes 3–5 hours including vacuum pump commissioning and electrical testing. Ceiling cassette installations take 5–8 hours. Window units are usually completed in 2–3 hours.
Yes — KL Renovator regularly installs wall-mounted and ceiling cassette units in condos and high-rises near Petaling Jaya and across SS2. We coordinate with building management for lift and service-ledge access where required.
All 20 major brands — Daikin, Panasonic, Mitsubishi, York, Acson, Carrier, Midea, Haier, Toshiba, Hitachi, Samsung, LG, Sharp, Fujitsu, Gree, National, Hisense, Aux, TCL, and Isonic. We install both inverter and non-inverter units.
Same-day installation is often available in SS2 and surrounding Selangor areas for bookings confirmed before 11 AM. WhatsApp +60182983573 with your address and preferred unit size to check today's slot.
Same-day installation slots are available across SS2 and surrounding Selangor. Get a confirmed price before we drill.